Clips are excellent for dealing with mid to high frequencies and for impact noise. If you have a complaint about impact noise (such as footstep noise), the Clips may be a good fit.

To properly plan your space, consult the Noiseproofing Clips installation guide.

When installed with hat channel the clip assemblies will typically extend around 1-3/4 in (4.5 cm) from the stud or joist. Please note: Clips cannot be installed over existing drywall as doing so will cause a Triple Leaf Effect.  
Please see our Noiseproofing Clip Installation Guide for specific recommendations on how to install the Clips. You can also view a video guide to installing Clips on our YouTube Channel.

When making any change to the recommended installation please work with a design consultant as we do not provide engineering services. This will ensure the load will be properly distributed.

The Clips work in conjunction with hat channel, which is available at most drywall yards. In addition to hat channel, you will need the appropriate screws and a screw gun to secure the clip and channel system to the studs or joists. Please see our Installation Guide and YouTube Channel for further details.

Clips must be directly installed onto a stud or joist and cannot be installed over existing drywall.